Garden Gates
The common defects to gates
· Wood splitting
· Hinges coming louse
· Nails in the wood getting nail fatigue.
Materials
· Studwork Timber 38x89mmx2.4m £ £15 (1)
· Kiln Dried Treated Regular 45x120mmx2.4m £ £15 (1)
· Galvanized Nails 2inchs £20 (1 bag)
· Garden Gate Kit Galvanized £ 20 (1)
The defects and limitations of gates
· The different sizes of garden gates
· The many different finishes
Tools
• Dust pan and brush
• Broom
• Cordless drill
• Pencil
• Tap
• Drill bits
• Combinations Square
• Panel saw
• Chop saw
PPE
· Boots
· Gloves
· Goggles
Risk assessment
• Cuts to hands (low risk)
• Splinters (low risk)
• Power tools (high risk)
We wear correct PPE. To prevent these risks from happening. To stop cuts to hands wear gloves so any wood or splinters. Then to stop dust or wood in eye wear goggles and also it will help when using power tools because PPE will help and use must be trained to use them. We are working to they health and safety act of 1974.
Method statement
We first got our PPE on, and then we made way to the area of work and found out the facing of gate is split all they way down they middle of some of them. So we then went to go and get the same existing facing and made way back. Then start tacking it off form gate and then measured out the length to they new facing its about 400mm and the just put back in same position and spacing. After fixed all well and made any last touches and pack away (plus clearness).
Quote
Dear customer
We have inspected your gate when making way to house and found it has a few big major splits down the face of wood.
So we got a few of the same wood gate facings and made way back to work area so that we can start to replace it all.
Ripped of existing facing and then made any slight ejectments to new facings (cutting off parts top fit).
Then put were existing old facing and then made any last touches finished and pack away (plus clearness).
Times
6 hours
Coast
• Materials £70
• Labour £30 per hour
• Overhead (petrol,PPE,permit) £200
Total cost £450
No comments:
Post a Comment