Friday, 26 October 2012

Hand basin



Hand basin












 















The common defects to Hand basin

·      Can easily be cracked
·      Falling off the wall
·      Overflow of water when too much pressure is applied to the drainage hole



 
Materials

·      Basic hand basin £ 70 (1)
·      Basin taps £20 (2)
·      Fischer Basin Fixing Kit £10 (1)



 
The defects and limitations of Hand basin

Fragile
Defects to plug hole tap holes
Chipped in transport or handling.
     



Tools

·      Wrench
·      Dust sheets
·      Justibal spinier
·      Screw diver (flathead)
·      Cordless drill
·      Drill bit
·      Level
·      Pencil
·      Tape
·      Tap spanner



PPE
·      Boots
·      Gloves
·      Goggles



Risk assessment

·      Falling objects
·      Sharp objects
·      Injury to feet(low risk
·      Shared of dirt or hand basin getting in eye
           We wear correct PPE. To prevent these risks from happening. To stop objects from falling we keep our hand dry when picking up hand basin. Also wear gloves to stop any sharp objects from cutting our hands. Wear boots to prevent any injuries which might occur if the basin falls. As well you must wear goggles when drilling the hole for where the basin will be and in case the person shatters the basin brakes.



Method statement

 First got our PPE on. Then  started to work out the area of where the basin will be and marked, plumb and level on the wall. Then started to assemble the basin together with the taps on before attaching to wall, then offer it up to the  wall and screwed it to the wall to give a fame  fixing .  Then we finished and packed away (plus clearance ).



Quote

Dear customer

We have inspected the area of were you would like your new hand basin to be, to carry out the new installment we will
 
Measure  up on wall and make were to fit
 
Then fit taps and sink to wall
 
Then we will finish the last touches that need to be done. (plus clearance).

 Looking forward  to hearing form you.

 Yours sincerely 
 
Lewis Bridge

 

 Times

6 hours

Cost

They cost of all they materials and labour will cost £440

    Materials £120
  Labour  £20 per hour
  Overhead (petrol,PPE,permit) £200

Total cost £440

1 comment:

  1. Your defects and limitations of basins aren't always size colour. It could be fragile, moulding defects to plug hole tap holes, chipped in transport or handling.

    Your method statement mentions pipe work but you don't explain any alterations you might have had to made.

    Your quote is also written as if you had completed the job before writing the quote.

    ReplyDelete