Plastic waste system

Plastic waste system

The common defects to Plastic waste system

·         Blockage in the pipe

·         Splits in the pipe

Materials

·         Plastic waste pipes 32mmx2m £15 (1)

·         Trap £20 (1)

·         Plastic pipe connector 32mm £5 (2)

·         Compression 90Deg Knuckle Bend 32mmn £5 (1)

The defects and limitations of Plastic waste system

·         Different type of sizes

·         Not flexible

·         Bent out of shape

Tools

·         Buckets

·         Wrench

·         Dust sheets

·         Screw driver (flathead)

·         Hack saw

PPE

·         Boots

·         Gloves

·         Goggles

Risk assessment

·         Wet floors and areas (high risk)

·         End of pipe still sharp(low risk)

·         Trips (medium risk)

 We wear correct PPE. To prevent these risks from happening. To stop us from getting hurt or tripping over objects, keep a tidy area at all times, remove pipe from walk ways and work areas. We wear gloves or hard hat when working with pipe and overhead pipe work. Lay dust sheets to stop water getting everywhere and also buckets as well.

Method statement

Wear correct PPE .  Find the split, leaks and damaged piping, when we spot the area we stop water mains and we remove damaged area with a bucket under it. Get rid of the damaged pipe, then take the measurements of the damaged area and fix back into place with new joint connectors, then test for any leaks and other problems then finished (plus clearance).  

Quote

Dear customer

We have inspected the plastic waste and you have a split in the pipe and trap was not tight. to carry out the repairs we will 

Cut out defected area and replace with new piping and fit with connectors.

Test joints for any leaks.

Looking forward to hear form you 

Yours sincerely 

Lewis 

 Times

6 hours

Cost

They coast of all they materials and labour will cost £370.

•   Materials £50

•   Labour £20 per hour

•   Overhead (petrol,PPE,permit) £200

Total cost £370